You already know our gang sheets. This is the same idea for hard surfaces: tumblers, mugs, ornaments, jars and more. No heat press. Peel it, stick it, done.
If it is hard and smooth, it is fair game. These are the favorites this season.
Same builder, same gang sheets. The difference is where it goes and how it goes on.
| DTF | UV DTF | |
|---|---|---|
| Ordering | Gang sheet builder | Gang sheet builder |
| Sticks to | Fabric | Hard, smooth surfaces |
| Heat press | Yes | None |
| Applying | Press, then hot peel | Peel and stick |
| Care | Wash the garment | Hand wash only |
Try it on a mug or a tumbler first.
Wipe the surface with isopropyl alcohol and let it dry. Skip dish soap and glass cleaner.
Before peeling anything, run a card firmly over the design a few times.
Dry fit it first. Once the backing is off, it can’t be repositioned. Then work from the center out.
Pull at a low angle, not straight up. Then press the edges down.
Hard, smooth surfaces only. Not for fabric, silicone or rubber. Hand wash only, and wait 48 hours before the first wash. Full application guide
Upload your art, arrange it, check out. Same 22 inch wide sheets you already order. You pay for the sheet, not the number of designs on it, and longer sheets cost less per foot.
A transparent PNG at 300 PPI at the size you want printed. White in your file prints as white ink.
Monday through Friday. Weekend orders start Monday.
Free local pickup at 3030 Knolin Dr in Bossier City, or shipped anywhere. Free shipping over $100.
It is a 3 inch Christmas UV DTF sticker we added to your gang sheet order. We pull one from a mix of designs, so yours may not match what someone else got. It is printed the same way as the sheets you can build below.
At 3 inches it suits the front of a mug or a tumbler, or a water bottle. A phone case or laptop works too if the surface is hard. See “Stick it on something” above for ideas.
Stainless tumblers and water bottles, ceramic mugs, glass, bare and painted metal, laptops, hard plastic phone cases, acrylic, coolers and toolboxes. It does not stick to fabric, silicone, rubber or textured surfaces. If an item flexes when you squeeze it, it is the wrong surface.
No. UV DTF is for hard, smooth surfaces. For fabric, order a regular DTF gang sheet.
No heat at all. It is peel and stick.
It cannot be repositioned once the backing is off, so dry fit it first. If you get bubbles, push them toward the edge with a card. Do not pop them with a pin.
A curve in one direction is fine. Keep the design off the tapered base near the bottom, and roll the tumbler as you smooth the sticker down instead of pressing it all at once.
No. Hand wash only, with mild soap and a soft cloth, and wait 48 hours before the first wash. Do not microwave a decorated mug, and skip abrasive scrubbers, bleach and long soaks.
A transparent PNG at 300 PPI at the size you want it printed. Any white in the file prints as white ink, and your art is printed exactly as uploaded, so check the sizing and spelling before you order.
No. You pay for the sheet, not the number of designs on it, so fitting more designs on a sheet brings your cost per sticker down. There are no setup, art or minimum order fees.
Standard turnaround is 24 to 48 hours, Monday through Friday. Orders placed on a weekend start Monday. Pickup is free at 3030 Knolin Dr in Bossier City, or we ship anywhere, free on orders over $100.
No. Your designs arrive arranged on one sheet, and you cut them apart with scissors.